The compact vertical bullnoser Extreme compactness, simplicity and an affordable cost are the main features of these torus-polishing machines that stand out also for their reliability (hydraulic motors and lever system - 1987 MM SpA patent - for the oscillation of the mandrel holding beam) and that are particularly suitable for small spaces and processing of 2-3-4 cm thick slabs. Offered in 2 versions: the LCT 521 - shaping of convex round edges by a single cup-shaped diamond wheel through shape copying - and LCT 522 - same principle for the round edges and shaping of the "OGEE" profiles (no polishing) thanks to an...
Maximum specialization for maximum optimization This particular version of the LCT vertical edge polishing machine has been created to shape and polish only BIRD BEAK (Demi-Bullnose) profiles and to make ANTI-SLIP GROOVES, guaranteeing high productivity at low costs in extremely compact dimensions. Dimensions mm 2950 x 1300 Potenza Kw 17 RIGHT TO LEFT working wise only Equipment: LCT 511-BB is equipped with: no. 1 ingoing DRIP-CUTTING MANDREL ON THE SIDE OF THE BELT, vertically and horizontally adjustable, on which it is possible to mount cutting tools, among which the MULTI-BLADE tool to obtain anti-slippery cuts; no. 1 ingoing 45° CHAMFERING...
The best-selling vertical edge polisher for stone worldwide. Since 1981. The first vertical edge polisher for stone in the world is today in its best shape ever. Extremely compact and convenient, LCV edge polisher is very simple to use, install and maintain. It is particularly convenient for small workspaces and for processing 2-4 cm thick slabs. Neither foundations nor draining slopes are required for water drainage. Dimensions: from 2450x1185 mm onwards Power: from 6.8 kW onwards RIGHT TO LEFT working direction only Models and accessories: LCV edge polishers are produced in two standard series, 611 and 711 MAGNUM. For each series four...
The edge polisher for small pieces and samples Extremely compact and cheap, LCV edge polisher is very simple to use, install and maintain. It is particularly convenient for small workspaces and for processing 2-4 cm thick slabs. Neither foundations nor draining slopes are required for water drainage. LCV-TF is a peculiar version of standard LCV: its double conveyor belt allows to process small pieces and samples with no effort. The minimum recommended size is 100 mm (height) x 60 mm (length) x 10 mm (thickness). LCV-TF, like all Marmo Meccanica machines, guarantees excellent results on any material, whether it's marble,...
The edge polisher for "Double Hollywood bevels" Extremely compact and convenient, LCV edge polisher is very simple to use, install and maintain. It is particularly convenient for small workspaces and for processing 2-4 cm thick slabs. Neither foundations nor draining slopes are required for water drainage. LCV-ST is a peculiar version of LCV. The beam of its polishing heads can tilt from 90° (for regular straight flat edge, for a maximum thickness of 60 mm) to 14° (the standard Hollywood Bevel). This special feature allows to shape and polish door thresholds at any angle in between, up to a thickness...
The best bullnose performances with the upsides of the vertical The compactness, the shaping of round edges by a single cup-shaped diamond wheel for all radiuses, and the micro oscillation of the polishing mandrels for flat edges and portions of flat edges (e.g. between two radiuses) are the main features of this torus-polishing machine. Reliability derives from the technical solutions MM has successfully tested in the years on thousands of machines (hydraulic motors and lever system - 1987 MM SpA patent - for the oscillation of the mandrel-holding beam). Right for even soft materials thanks to the good sliding sensitivity...