HTO-R

The 5-axes CNC bridge sawing machine with turning head and stationary table

Dimensions L 590 x D 375 x H 260 cm
Structure concrete walls
Total power consumption 14 kW
Diameter of disc 300-500 mm (opt. 625 mm)
Disc motor 11 – 13.5 kW
Interpolated axes 5
Axes range X 3500; Y 2650; Z 370 cm
A-axis range (head tilting) 0° - 90° Automated
Drilling tool (head tilt 0° - 90°) Optional
C-axis range (head rotation) Standard: -3° ÷ +180°; Optional: -3° ÷ +365° (interpolated)
Tilting table Standard
Table dimensions 3500 x 2000 x 670 (h) mm
Laser pointer Start + Cut-line
Remote control Optional
Disc / tool probe Optional
Slab thickness probe Optional
“Taglio” software for operational control Standard
On-board camera Optional
“Automov” slab-handling system Optional
Abs safety doors and closed structure Optional

STRUCTURE: on concrete walls (or steel walls on request)
Single beam BRIDGE made of structural steel framing. Bridge translation on linear guides with sliding blocks (4-ways recirculation). Centralized greasing blocks and water/dust protections. Movement powered by a precision brushless motor on racks with inclined teeth.
SLIDING OVERHEAD SUPPORT running along the bridge on Linear guides with sliding blocks (4-ways recirculation). Centralized greasing blocks and water/dust protections. Movement powered by a precision brushless motor on racks with inclined teeth.
11 kW / 15.1 hp (S6) DISC ELECTRO-SPINDLE: inclinable from 0 ° to 90 ° with step at 45 ° and rotating from 0 ° to 180 ° (± 3 °) (optional from -3 ° to + 363 °), with motorized and controlled movements.
PROGRAMS:
- Multiple measures program, parallel cutting
- Vertical and inclined step cutting routine
- Differently oriented cuts in manual and automatic mode
- Curbed cuts with the disc program
- Optional: router bits and candle tools;
CONTROL BOARD supported by an articulated arm and containing all the necessary controls, 17′ “touch screen” programmer inclusive.