HTO-MB

CNC Bridge saw with stationary bench and turning head, on monolithic steel structure

  • Request More Info
  • PDF Brochure
HTO-MB HTO-MB HTO-MB HTO-MB HTO-MB HTO-MB HTO-MB HTO-MB HTO-MB HTO-MB HTO-MB HTO-MB HTO-MB HTO-MB HTO-MB HTO-MB
Description
  • Dimensions L 590 x D 375 x H 260 cm
  • Structure monolithic
  • Total power consumption 14 kW
  • Diameter of disc 300-500 mm (opt. 625 mm)
  • Disc motor 11 kW
  • Interpolated axes 4 – 5
  • Axes range X 3500; Y 1900; Z 370 cm
  • A-axis range (head tilting) 0° - 90° Automated
  • Drilling tool (head tilt 0° - 90°) Optional
  • C-axis range (head rotation) -3° ÷ +180° (interpolated)
  • Tilting table Optional
  • Table dimensions 3150 x 1750 x 670 (h) mm
  • Laser pointer Start + Cut-line
  • Remote control Optional
  • Disc / tool probe Optional
  • Slab thickness probe Optional
  • “Taglio” software for operational control Standard
  • On-board camera Optional
  • “Automov” slab-handling system n.d.
  • Abs safety doors and closed structure n.d.

Monolithic cnc bridge saw with stationary bench and turning head

Suitable for many different cutting works on slabs with a total thickness of 10 - 175 mm.

Available in 3 versions:

  • HTO-MB: manual and semi-automatic work mode, with inclinable head from 0 ° to 50 ° and rotating from 0 ° to 90 °, lockable in the positions 0° and 90° only;
  • HTO-MB1: manual, semi-automatic and automatic work mode, with inclinable head from 0 ° to 90 ° with a 45 ° step and rotating from 0° to 180°;
  • HTO-MB2: manual, semi-automatic and automatic work mode, with tilting head from 0 ° to 90 ° with a 45 ° step and rotating from 0° to 180° (optional up to 360°); 5th axis on request.

 

Several optional features and accessories are available, including:

  • Tilting bench
  • Laser pointer
  • Cut range extension
  • Head rotation range extention
  • Software extension packs

Main features:

  • Available cutting: 3500 x 1900 mm
  • Disc: 300 - 500 mm
  • Power: from 11kW
  • STRUCTURE: monolithic
  • Single beam BRIDGE made of structural steel framing. Bridge translation on linear guides with sliding blocks (4-ways recirculation). Centralized greasing blocks and water/dust protections. Movement powered by a precision brushless motor on racks with inclined teeth.
  • SLIDING OVERHEAD SUPPORT running along the bridge on Linear guides with sliding blocks (4-ways recirculation). Centralized greasing blocks and water/dust protections. Movement powered by a precision brushless motor on racks with inclined teeth.
  • Fixed , non-tilting, non-turning BENCH.
  • 11 kW / 15.1 hp (S6) DISC ELECTRO-SPINDLE:
    • HTO-MB: inclinable from 0 ° to 50 ° - manual inclination by handwheel and displayed on control panel - and rotating from 0 ° to 90 ° and lockable in the sole positions at 0 ° and 90 °, with manual movement displayed on control panel.
    • HTO-MB1: inclinable from 0 ° to 90 ° with step at 45 ° - Manual inclination by handwheel and displayed on control panel - and rotating from 0 ° to 180 ° (± 3 °), motorized and controlled movement.
    • HTO-MB2: inclinable from 0 ° to 90 ° with step at 45 ° and rotating from 0 ° to 180 ° (± 3 °) (optional from -3 ° to + 363 °), with motorized and controlled movements.
  • PROGRAMS:
    • HTO-MB: multiple measures program, parallel cutting. Vertical and inclined step cutting routine;
    • HTO-MB1: multiple measures program, parallel cutting. Vertical and inclined step cutting routine. Differently oriented cuts in manual and automatic mode;
    • HTO-MB2: multiple measures program, parallel cutting. Vertical and inclined step cutting routine. Differently oriented cuts in manual and automatic mode. Curbed cuts with the disc program. Optional: router bits and candle tools;
  • CONTROL BOARD supported by an articulated arm and containing all the necessary controls, 17' “touch screen” (10' for HTO-MB) programmer inclusive.